Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 12 - Jul 17
For Your Every Summer RSVP, with Code: SUMMER15
Description
MATEKSYS F405-MiniTE Flight Controller - Mini 20x20The F405 MiniTE Flight Controller was designed to be smaller and lighter than its bigger brother, and the 20x20mm mount allows for more space to work with on your build. Features Compared with F722 miniSE 8motors or 6motor+2servos, F405 miniTE supports 8motors+3servos in INAV BF multirotor mixer Redesigned target MATEKF405TE support 8x bi directional DSHOT. Support DJI air unit PnP, and a 10V BEC for DJI OSD or analog VTX F405 Mini has a 1MB flash
The F405 MiniTE Flight Controller was designed to be smaller and lighter than its bigger brother, and the 20x20mm mount allows for more space to work with on your build.
Features
- Compared with F722-miniSE 8motors or 6motor+2servos, F405-miniTE supports 8motors+3servos in INAV/BF multirotor mixer
- Redesigned target MATEKF405TE support 8x bi-directional DSHOT.
- Support DJI air unit PnP, and a 10V BEC for DJI OSD or analog VTX
- F405 Mini has a 1MB flash which can run with ArduPilot.
- Convertible 20mm to 30.5mm mounting
- InvenSense GEN3 IMU ICM42605
Specifications
- Mounting Pattern: 20x20 M2/M3, 30X30 M3
- ADC: 4 (VBAT, Current, RSSI, Airspeed)
- Blackbox: 16M-byte Flash memory
- Baro: Goertek SPL06-001 (I2C)
- PWM outputs: 12 (8 Dshot)
- BEC: 5V 1.7A & 10V 1.4A
- Dimensions: 28x28mm
- Input: 6~30V (2~6S LiPo)
- MCU: STM32F405RGT6
- Current Sensor: No
- IMU: ICM42605
- OSD: AT7456E
- Weight: 5g
- UARTs: 6
- PINIO: 2
- I2C: 1
Firmware
ArduPilot hwdef MatekF405-TE
INAV Target MatekF405TE
- inav_3.0.2_MATEKF405TE
- inav_4.0.0_MATEKF405TE
BetaFlight Target MatekF405TE
- set dshot_bitbang = ON when using X6 and X8 DSHOT
- betaflight_4.3.0RC1_MATEKF405TE
- betaflight_4.3.0RC2_MATEKF405TE
- betaflight_4.2.10_MATEKF405TE
Includes
- 1x MATEKSYS F405-MiniTE Flight Controller - Mini 20x20
- 1x SH1.0_8pin cable 5cm (including 2x 8pin connectors) for 4in1 ESC
- 1x SH1.0_6pin to GH1.25_8pin cable 8cm for DJI Air Unit
- 1x 20mm to 30mm conversion plate(blue PCB)
- 6x Silicon grommets M4 to M3
- 6x Brass grommets M3 to M2
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy