Rust-Oleum 995 Silicone Commercial Grade Roof Coating 360849

Rust-Oleum 995 Silicone Commercial Grade Roof Coating 360849Rust Oleum 995 Silicone Commercial Grade Roof Coating is a 100% silicone, high solids formula designed to form a durable, breathable, and watertight barrier. It effectively resists ultraviolet radiation and adapts to temperature extremes, ensuring long lasting protection against weathering. This coating reflects solar heat to improve energy efficiency and can be applied over a variety of roof types, including spray applied polyurethane foam, aged

Rust-Oleum 995 Silicone Commercial Grade Roof Coating is a 100% silicone, high-solids formula designed to form a durable, breathable, and watertight barrier. It effectively resists ultraviolet radiation and adapts to temperature extremes, ensuring long-lasting protection against weathering.

This coating reflects solar heat to improve energy efficiency and can be applied over a variety of roof types, including spray-applied polyurethane foam, aged single-ply membranes like PVC, EPDM, TPO, Hypalon®, acrylic coatings, concrete, asphalt, modified bitumen, metal, and existing silicone coatings. Ideal for commercial roofing.

• 100% silicone, 95% solids
• Excellent wet/dry adhesion
• 88% reflectivity
• Resists ponding water
• Resists rain after 1 hour
• 5 gallon

For Best Results

Do not thin or alter product. Apply only when air, material, and surface temperatures are between 32-120ºF (0-49ºC). For cold weather application (below 55ºF), store unopened container indoors for 24 hours prior to application. Do not apply if rain is expected in less than 2 hours. Mechanically mix prior to application and during use.

Avoid entraining air when mixing. Apply with a brush, ¾” nap roller or spray equipment. For one coat application, apply at a minimum rate of 1.5 gallons per 100 square feet (25 mils wet). Coating must be applied uniformly and without pinholes. The dry film thickness (DFT) will be approximately 24 mils.