Whole House Water Softener 1054 - 1.5CU FT Softener Resin Fleck 5600 Mechanical Valve

Whole House Water Softener 1.5 CU Cation Resin - 1054 FRP Tank, Fleck 5600 Timer Softener Valve

• Water Softener is an Ion Exchanger
  Hard Water with a high calcium/magnesium content enters the softener through the "in" port indicated by the green arrow. It passes through the control valve and into the tank where it goes from top to bottom through a specially prepared resin that "softens" it, the resin consists of specially manufactured beads that have been saturated with sodium ions. Softening occurs as the hardness minerals in the water attach themselves to the resin and are "exchanged" for sodium. The softened water then enters the long center tube called a riser, via the strainer basket at the bottom of the tank and passes upward through the riser. Then water exits the softener via the control valve (Blue Arrow) and is sent to the desired location.
  
  When the resin becomes saturated by hardness minerals, the softener automatically goes into re-generation. The regeneration process is initiated by a timer. By this process the hardness minerals are washed down the drain and resin bed is rinsed, re-settled and re-charged with sodium, it is now ready again to soften your water. The regeneration process is accomplished by passing very salty water from the brine tank through the resin. The brine tank must remain filled with softener salt at all times so that it can re-generate the softening resin.