ERYONE Marble PLA 3D Printer Filament 1kg/2.2lbs 1.75mm for FDM 3D Printer and Pens Great for sculptures and models

ERYONE Marble PLA 3D Printer Filament 1kg/2.2lbs 1.75mm for FDM 3D Printer and Pens Great for sculptures and modelsERYONE Marble PLA Filament is a high quality Marble PLA Filament that's great for creating realistic stone marble prints and parts. Great for sculptures, cosplay and model making. Suits most 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Easythreed and more. Features: Marble Effect: Marble PLA is a mixture of pure PLA and marble elements, which produces natural marble effect. Precise Dimension: 1. 75mm in diameter with tolerance 0.

ERYONE Marble PLA Filament is a high-quality Marble PLA Filament that's great for creating realistic stone/marble prints and parts. Great for sculptures, cosplay and model making. Suits most 3D Printers from Creality 3D, Artillery, SUNLU, Geeetech, XVICO, Easythreed and more.

Features:

• Marble Effect: Marble PLA is a mixture of pure PLA and marble elements, which produces natural marble effect.
• Precise Dimension: 1.75mm in diameter with tolerance ±0.03mm.
• Easy to Print: Ultrafine particles, easy to melt and print, and will not cause blockage. Excellent print quality.
• Vacuum Packaging: Every spool of filament is vacuum sealed to be kept away from moisture and will not be oxidized.
• Compatibility: 1.75mm diameter which is compatible with almost all kinds FDM 3D printer and pens.

Specifications:

• Filament Diameter: 1.75mm
• Tolerance: ± 0.02mm
• Print Temperature: 190-220°C
• Recommended Print Temperature: 200-220°C
• Recommended Print Speed 30-60mm/s
• Heated Bed Temp: 55-70°C
• Gross wt: 1.35kg (approx)
• Net Weight: 1kg (approx)

FAQ:

• Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging.
• Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues.
• Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material.