Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 14 - Jul 19
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
MAPEI Mapesil T Plus Silicone Caulk – 5006 HarvestMapesil T Plus Silicone Caulk (5006 Harvest) Professional grade, 100% silicone sealant color matched to MAPEIs grout palette for heavy traffic and movement joints. Designed for interior exterior, wet or dry installations with low sheen finish to blend with grout lines. Key Features: Enhanced Adhesion: Formulated for heavy traffic and expansion movement joints exceeding ASTM ANSI standards Color Matched: 5006 Harvest shade aligns with MAPEIs grout
Mapesil T Plus Silicone Caulk (5006 Harvest)
Professional-grade, 100% silicone sealant color-matched to MAPEI’s grout palette for heavy-traffic and movement joints. Designed for interior/exterior, wet or dry installations with low-sheen finish to blend with grout lines.
Key Features:
- Enhanced Adhesion: Formulated for heavy-traffic and expansion/movement joints exceeding ASTM/ANSI standards
- Color-Matched: 5006 Harvest shade aligns with MAPEI’s grout palette for seamless transitions
- Low-Sheen Finish: Matches the gloss of grout joints for a cohesive look
- Durable 100% Silicone: Excellent elongation and flexibility; suitable for change-of-plane and joint applications
- Wet-Area Ready: Usable in pools and spas when properly cured; helps prevent mold and mildew
Specifications Table:
| Specification | Details |
|---|---|
| Material | 100% silicone |
| Color | 5006 Harvest (color-matched to MAPEI palette) |
| Finish | Low sheen to match grout joints |
| Use Areas | Interior/exterior; wet and dry installations |
| Application Types | Heavy-traffic and expansion/movement joints; change-of-plane; tile/stone joints |
| Pool/SPA Use | Allowed after 7 days cure; water pH 6.5–7.6; free chlorine <5 ppm |
| Mold/Mildew | Helps prevent mold and mildew |
| Freeze/Thaw Resistance | Resistant after 72-hour cure at 73°F (23°C) and 50% RH |
| Standards | Exceeds ASTM and ANSI standards; suitable per TCNA Environmental Exposure Classifications (Res 1–7, Com 1–7) |
Frequently Asked Questions (FAQ):
Q: Is this caulk suitable for showers and wet areas?
A: Yes. It is 100% silicone and rated for interior/exterior wet installations; allow proper cure per instructions.
Q: Can it be used in pools or spas?
A: Yes, after 7 days of curing before filling; maintain pool pH 6.5–7.6 and free chlorine <5 ppm.
Q: Does the sheen match typical grout lines?
A: It is formulated to a low sheen to match grout joints; note Jet Black is more satin/shiny (not applicable to Harvest).
Q: What types of joints is it designed for?
A: Heavy-traffic and expansion/movement joints, including change-of-plane and tile/stone joint applications.
Q: Is it resistant to freezing conditions?
A: Freeze/thaw-resistant after a 72-hour cure at 73°F (23°C) and 50% RH.
Seamless Sophistication in a Grout-Matched Hue
Mapesil T Plus in Harvest slips into your tilework like a tailored seam, finishing the space with a refined, low-sheen line. Its 100% silicone body brings supple flexibility and enduring strength to busy thresholds and wet rooms. Pair the warm Harvest tone with textured stone or matte porcelain for an elevated, cohesive look. It’s the quiet luxury essential that perfects every edge and joint.
Finish your tile project with a durable, color-matched seal—choose Mapesil T Plus in 5006 Harvest today.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 754 reviews
Sort
Product Reviews
★★★★★ 5
Plug & Play - Stable Fast Network
Size: 3 Pack, Style: Wi-Fi 7 BE5000, Size: 3 Pack, Style: Wi-Fi 7 BE5000
I replaced a previous version of these Deco mesh routers (X55)- installed my previous ones at my in laws and upgraded myself with these. It was truly plug-and-play, and I have all of them wired backhaul. The only couple things that surprised me was the size. They are much larger than they appear in the pictures. The other is the LED control. I like the previous version you cannot individually control the LEDs for these so it’s all or nothing. I upgraded the unmanaged switch at my patch panel that wires the house with 2.5gb, making sure that the backhaul on these was as possible.
By this point I’ve had them for about six months and I’ve had zero downtime. My wife and I are both professionals. I work from home and have never once had a disruption so the reliability has been perfect. All my devices were able to connect without issue and I have about 78 total wireless devices across my 4000 square-foot house.
Even my devices that control sprinkler systems in my yard connect great. Until I get about 100 yards from my house (way in the backyard).
Meaning the compatibility and range are top-notch.
My Internet speed is only 1 gb at the moment, but I wanted something more future proof since my ISP has up to 10 available.
I definitely recommend this product and actually all of the deco mesh systems.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 15, 2026
★★★★★ 5
Finally Fixed the Dead Zones in My House
Size: 3 Pack, Style: Wi-Fi 7 BE5000
I bought this after getting tired of dealing with weak Wi-Fi in certain parts of the house, and the difference was noticeable almost immediately. Setup was much easier than I expected and only took a few minutes. Before installing it, video calls would freeze, pages would take forever to load, and some devices would randomly disconnect when moving farther from the router. Since adding this mesh extender, the connection has been much more consistent and I’m getting coverage in areas that barely had a signal before. I also like that devices seem to switch between the router and extender smoothly without me having to think about it. If you're struggling with dead spots or unreliable Wi-Fi, this has been a worthwhile upgrade.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 28, 2026
★★★★★ 5
Very outdoor. Outstanding outdoor Wi-Fi — perfect companion for Starlink (even in winter!
Size: 1 Pack Outdoor, Style: Wi-Fi 7 BE5000, Size: 1 Pack Outdoor, Style: Wi-Fi 7 BE5000
I’m using this as the main router at an off-grid cabin, connected directly to a Starlink Mini, and it has been phenomenal. The coverage and stability are far better than the built-in Starlink Wi-Fi router, especially outdoors and around multiple buildings.
This unit serves as the primary node in my network, with a few Deco M5 units extending the mesh, and the handoff between them is seamless. I’m getting reliable coverage over roughly 3 acres, including around the cabin, outbuildings, and yard — something the Starlink router couldn’t come close
It’s mounted outdoors and has gone through freezing winter conditions with snow, ice, and icicles forming around it — zero issues so far. Performance hasn’t dropped, and it’s stayed rock solid.
Setup was straightforward, management through the app is easy, and once it’s running you basically forget about it — which is exactly what i want.
If you’re running Starlink at a rural property, cabin, farm, or large yard, this is an excellent upgrade and easily worth it. Strong signal, wide coverage, and dependable even in harsh conditions.
Highly recommended..!.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 31, 2026
★★★★★ 5
Great signal throughout the house and beyond
Size: 3 Pack, Style: Wi-Fi 7 BE5000
Got this set of 3 to replace the single rental EERO that the service provider put in when my mom got fiber. My biggest issue with the EERO was that the service provider set it up, meaning I had no way to control the device. Specifically, my mom is old and apt to click on scam ads or to call the number when a scam popup freezes her keyboard (thanks a lot, Zuckerberg). The only layer of protection I can give her is an adblock DNS, and to do so I need control. Also, I could not get her living room TV to connect to WiFi and signal was starting to drop off a bit in rooms farthest from that single device.
At the time of purchase, this was the most economical 3 mesh device WiFi 7 system from a well established brand. The devices are a bit bulky, but are not eye sores and seem to be very well made. The available wall mount brackets for this style router appear to be more secure than the ones for the cylindrical models, and they won't look as goofy hanging on the wall which is another plus. Mounting brackets are sold separately.
Her TV still does not connect to WiFi, so placed one of these near the TV and connected it via ethernet cable. The third is in one of the rooms farthest from the main base. The range is quite acceptable, with my phone getting full signal strength in the yard @ >50' from the house in some places.
During setup, was given the option to set up MLO WiFi, aka Multi-Link Operation, which creates a second WiFi network that may provide higher throughput than the basic WiFi connection. It is not compatible with all devices, so likely best practice to connect lower need or 'potato quality' devices to the lower throughput base network (phones, TVs, tablets, guests, etc.). The fiber speed is around 300mbps. After extensive Speed Test usage to the point that they stopped allowing me to run Speed Test, both the Base WiFi and MLO WiFi performed similarly with possibly 10-20mbps higher average via MLO. My guess is that MLO may only be truly useful for gigabit connections.
Going straight WiFi with these things doesn't add any significant latency or noticeable drop in throughput in my situation, but could be a concern in larger homes and/or when more walls/junk/metal is between mesh devices. Each of these has 2 ethernet ports, and hardwiring them together with ethernet cable will provide the strongest/fastest connection between mesh devices. The theoretical maximum reliable length is 328' (100 meters) for ethernet cable, so quality Cat6 cable could really put some distance between the main base and the 3rd mesh station (possibly with some WiFi dead spots in between). This is not unique to this system, as most mesh devices have 2 or more ethernet ports.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 8, 2025
★★★★★ 5
Very easy to set up a,works great
Size: 2 Pack, Style: Wi-Fi 7 BE5000
These improved the coverage in my house a lot and the speeds are incredible. The app, easy to set up and have not had a single problem since installing it, it's been 2 months.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
recommand products
Ice-O-Matic Elevation Series 30-Inch Air-Cooled Modular Cube Ice Maker, Full-Size Cubes, 465 lb./Day
2021.78
Shibari Halo 10x Wireless Waterproof Power Wand Massager
19.96
InWeave Women's Mustard Gold Print One Shoulder Kurta Set
31.85
Brian Crower Valve Springs - Single (Mitsubishi 4G63 Eclipse/Evo/Dodge Srt-4) BC1100
108.42
InWeave Women's Red Brocade Jacket
32.76